| Customization: | Available |
|---|---|
| Logo Printing: | Without Logo Printing |
| Size: | Middle |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HDT Precision Cutter Sharpener
Having opening type structure,adding operation space,enlarging grinding range.This sharpener can grind helical edge and cutting edge of miller,also can grind relief edge of taper,drill,reamer and ball end mill by changing different attachment.The main part of sharpener is made of excerllent .Alumium it has many features such as light weight,resist rot,etc.It takes up advanced international technique of air floating, the spindle rotate flexibly after being pressed,reduce friction to lowest.
| Main Technical Parameter | INCH | MM |
| End mill Capacity | 2"*9"10" | 50*225*250mm |
| Swing over table | 9-3/4" | 245mm |
| Cross tavel of table | 6" | 150mm |
| Longitudinal travel of table | 3" | 75mm |
| Maximum dia. of wheel | 5"*2"*1-1/4" | 125*52*32mm |
| Tilt adjustment for wheelhead | +35°-5° | +35°-5° |
| Air bearing swivel | 360° | 360° |
| Air bearing stroke | 10" | 250mm |
| Table infeed graduation | 0.001 | 0.02mm |
| Air bearing gradution | ≥0.63MPa | ≥0.63MPa |
| Pipe joint diameter | Z1/4" | Z1/4" |
| Collet fit for spindle | 5C | 5C |
| Parallelism of between two tables | 0.01/100mm | 0.01/100mm |
| Parallelism of sleeve center line to worktable | 0.01/100mm | 0.01/100mm |
| Speed | 3450/2580rpm | 2800rpm |
| Voltage | 110V/1 Phase | 230V |
| Power | 1/3HP | 0.25Kw |
| Frenquecy | 60hz/50hz | 50HZ |
){kind=link}